Spindle-cooling-tower-fill Spindle cooling tower fill1 150x150 - Spindle cooling tower fill
Spindle-cooling-tower-fill Spindle cooling tower fill2 150x150 - Spindle cooling tower fill
a9f2 - Spindle cooling tower fill - Spindle cooling tower fill
Spindle-cooling-tower-fill Spindle cooling tower fill4 150x150 - Spindle cooling tower fill
Spindle-cooling-tower-fill Spindle cooling tower fill5 150x150 - Spindle cooling tower fill
cx_13

850*1000mm / 1000*1000mm Spindle cooling tower fill

Matetial

PVC/PP

 Width

850mm / 1000mm / 1300 mm

Height

1000mm

Thickness

0.25mm - 0.4mm

Pitch Distance

14.5/16/18mm

Common size

850*1000mm(width*length), 16mm / 18mm(gap)

Flute

16mm

Temperature suitable

-35°C~60°C

Color

Black, gray 

Shaping mode

Plastic extrusion mould

Application

Cross flow cooling tower

Description

The cooling tower packing is the core part of the cooling tower. The cooling tower packing process made by our company has achieved technological innovation, energy saving and environmental protection from the previous molding production line to the current plastic suction process. At present, the plastic suction process has strict requirements for cooling tower fills: good flame retardancy, anti-aging, unique appearance design, good water film formation, long hanging time and best cooling effect.

Characteristics and requirements

Packing material requirements: flat sheet material plasticizing uniform, no dispersion of bad materials, the appearance of color is consistent, the surface does not attach various kinds of oil pollution. The surface of the flat sheet material is flat, without obvious holes and bubbles. The thickness of the sheet is between 0.30~0.45mm.

The forming sheet material requirements:the forming piece must adopt the point wave material,use the adhesive to assemble the block,ensure the bonding is firm and the whole rigidity is good.

Adhesive requirements:the adhesive must have water resistance,heat resistance(65?),cold(-20?),aging resistance and other properties.

Description Pictures:

Spindle cooling tower fill can be designed with different width (A Part) :

1000mm Spindle cooling tower fills
850mm Spindle cooling tower fills

The pitch of Spindle cooling tower fill(a part) :

sheetspacing - Spindle cooling tower fill

Spindle cooling tower fill has various of color :

Spindle-cooling-tower-fill-black
Spindle-cooling-tower-fill-gray

Detailed drawing of Spindle cooling tower fill :

Spindle cooling tower fills
Spindle cooling tower fills
Spindle cooling tower fills
Spindle cooling tower fills
FAQ

Q: Does your products come with warranty?

A: YES! We provide our products with 1 years International Warranty.

Q: Can I customize from your factory?

A: Absolutely! We will try our best to satisfy every single requirement from you about cooling systems. At the same time, according to your requirements, we will provide you with a very reasonable and detailed quotation list.

Q: Can you give me a discount?

A: Well, first we will make sure the high quality of the products, then we do our best to save every single cent of you as much as we can by exquisite design.Of course,the more the better. It will be much appreciated if you can write the dimension and quantity in the inquiry.